Solvent-based, fully VOC 2010 compliant alkyd matt paint for interior use.Based on high quality solid alkyd resins and pigments. For wood and metal surfaces where a tough and durable matt finish is required.
Excellent flow out of brush marks. Indoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 litres
JUNOPLUS Enamel Matt
On wooden surfaces, prime with Synthetic Sealer. Sand in each coat.
On ferric and steel surfaces, clean and prime with Multisupport Primer.
On aluminium and galvanised surfaces, clean and prime with Multisupport Primer.
INDOOR
Recommended for metallic, wooden or masonry surfaces.
Brush and enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases. Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. More aggressives Thinners (D-17, d-45) might cause wrinkling problems and delay the internal drying.