Thick high opacity blockfiller based on acrylic copolymers.For use on surface imperfections upgrading substrate's apperance.
Indoor use as finish or primer for subsequent coats.
Dilutes and cleans with water.
EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
15 / 4 litres
CASTOR Block filler
On concrete, cement or new water seal based mortar surfaces prime with HIDROCRIL.
If the surface is dusty, prime with HIDROCRIL
On Plaster or Plasterboard surfaces, prime with HIDROCRIL and seal with AQUASELL.
In case of mildew, microbacteries, etc. contamination, clean with a 10% water and bleach solution, rinse with water, let it dry and prime.
In case of efflorescence, brush, clean with a 10% chloride acid solution, rinse with water and let it dry.
INDOOR
Recommended to hide substrate imperfections on stairs, public spaces, offices, rooms, etc.
Brush, roller or spray.
As a primer, same product diluted with 20% wáter can be applied by using a wool roller. Once dry, apply the blockfiller (non - or slightly diluted) using a wool roller aiming for an even finish.
For stippled or textured effect take the folowing steps:
Use a segmented foam paint roller (nº 3).
Apply using an air gun. The stipple effect is achieved by spraying the product.
Apply 2 coats, first coat diluted with wáter (20%), and the second coat undiluted.