Waterbased waterproofing elastic paint.
Based on elastomeric acrylic resins.
Outdoor use.
Dilutes and cleans with water.
EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
15 / 4 litres
ANTILEAK JUNOTERAS
Fill the small fissures with non diluated product, preferably with brush. Ensure the correct fissure filling and sealing.
Fa?ades withou fissures or with fissures < 0,6 mm must be cleant and dryed. If the fissure is 0,6 - 1 mm it is recommended to prepare and repair with mortar or acrylic dough. Prim with PRIMERLITE.
In case of mildew, microbacteries, etc. contamination, clean with a 10% water an bleach solution, rinse with water, let it dry and prime.
In case of efflorescence, brush, clean with a 10% chloride acid solution, rinse with water and let it dry.
INDOOR-OUTDOOR
Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on fa?ades, balconies and roofs without fissures over 0,6 mm that may have damp problems not being exposed to intense use.
Brush, roller or pneumatic air spray gun.
On fa?ades, apply 2 or more coats untill obtain a 0,5 mm thick dry paint coat. On concrete covers (over 1% slope gradient) apply a first coat and a fiberglass mat over it. Finish applying all neccesary coats untill obtain a 1 mm thick dry paint coat or a 2 lt/m2 performance.
It is recommended to build the structure using a fiberglass mat, as a sandwich, which enhances the paint consistence increasing the permeability resistance and the insulation.