Solvent-based, fully VOC 2010 compliant alkyd Satin paint for interior use. Based on high quality solid alkyd resins and pigments. For wood and metal surfaces where a tough and durable satin finish is required.
Excellent flow out of brush marks. Withstands cleaning. Indoor use.
Dilutes and cleans with MINERAL Turpentine (D-16) Solvent.
4 / 0,750 / 0,375 litres
JUNOLAC Satin Finish Enamel
On wooden surfaces, prime with Synthetic Sealer indoor and Woodbase Coating outdoor. Sand between each coat.
On ferric and steel surfaces, clean and prime with MULTISUPPORT Primer.
On aluminium and galvanised surfaces, clean and prime with MULTISUPPORT Primer.
On cement, Plaster and Plasterboard surfaces, prime with Synthetic Sealer or an acrylic paint with A-100 STIMAX.
INDOOR
Recommended for metallic and wooden surfaces (doors, windows, furniture, etc.) Application on thin coats to guaratee inner dryness.
Brush or enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases. Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. Depending on the application conditions, definitive shine might be obtained after 7 days.