Synthetic varnish with UV protection.
Based on alkyd resins and UV filters with decorative and protective properties.
Indoor or outdoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 / 0,375 litres
JUNOLAC Varnish Glossy
Wood must be cleant, dry, grease free and sanded. Its dump percentage must not be >15%.
It could be applied over properly maintained old varnishes but in order to get the best results is recommended to remove them completly.
On new woods, it is recommended to prime them with 10-20% diluated Wood Base Coating, properly stretched.
INDOOR-OUTDOOR
Recommended for all wooden surfaces.
Brush or pneumatic air spray gun.
Pneumatic air spray gun: dilute with a MINERAL Tupertine (D-16) 10-15%.
High resined woods must be cleant with a UNIVERSAL Thinner (D-45) to avoid drying problems.
Apply in thin coats, properly spread, untill obtaining a uniform shine and a suitable thickness for a perfect wood pores cover.