Polyurethane synthetic varnish.
Based on urethaned resins with decorative and protective properties that create a pleasant to the touch.
Indoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 litres
JUNODUR Varnish Satin
On new surfaces, prime with WOOD BASE COATNG.
On varnished surfaces, if the varnish is in good conditions, it is nececesary to remove the grease and sand it smoothly.
If the varnish is not in good conditions, remove the varnish, clean and sand smoothly the surface.
INDOOR
Recommended to repair and varnish wooden floors that require resistance to daily use and home cleaning products.
Brush: Ready to use or dilute with a MINERAL Turpentine (D-16) 5%.
Pneumatic air spray gun: dilute with a MINERAL Turpentine (D-16) 15-20%.
Passing 24 hours after priming and sanding, apply 2 JUNODUR Varnish coats diluted with MINERAL Turpentine (D-16) 5%, spreading properly the product and sanding between each coat.
High resined woods must be previously cleant with UNIVERSAL Thinner (D-45) for avoiding drying problems.
Apply thin coats, properly spread, untill obtaining a uniform shine and colour and a suitable thickness for a perfect wood pores covering.