Plaster for levelling and polishing rough walls. Great coverage and surface adherence.
15 / 5 / 1 kg
JUNO Plaster
INDOOR
Recommended for high absorbent mineral surfaces, rough walls levelling, quick breachs and holes fillng and frame gluing.
Joints between plasterboards should be reinforced and the surface cleant and dust and damp free. Apply plaster to solid backgrounds with firm pressure. The best results are obtained by applying a ‘tight’ coat, then turning back with the same batch of material to fill out to the required thickness. If a substantial area is to be covered a ‘feather-edge’ is used to straighten the plaster to a reasonable plane, whilst at the same time filling in any hollows. When the plaster has stiffened sufficiently, further ruling with a ‘feather-edge’ may be necessary to achieve a flat surface. As the plaster progressively stiffens, further flattening and paring should be carried out by using a trowel. When the plaster is sufficiently firm, ‘closing in’ with a trowel should commence. Wet a trowel with water and apply pressure to the surface DO NOT OVER POLISH.