Synthetic alkyd based enamel with high antioxidant properties for direct application on to steel or iron surfaces without the need for primer. EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 L/ 750 ML/ 375 ML
JUNOLAC ANTICORROSIVE Gloss (New)
Iron and steel: All surfaces to be painted should be clean, dry and free from loose and flaking material and rust.
Aliminium and galvanized surfaces: Wash with clean water containing detergentes and wire brush. Once the surface is dry, apply a coat of JUNO's Multisupport primer (Prd. code 27.040).
Painted surfaces: If surface is in clean and well-preserved condition, free from loose flaking material, Junolac can be apply directly with no primer required. Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly to provide key. If previous paint is in poor condition remove with JUNO's paint remover (prod. code 83.100).
Indoor-Outdoor
Recommended for iron or steel surfaces where exhaustive preparation of surface is difficult or impossible, such as large structures, gates, railings, bridges, etc.