Synthetic varnish with UV protection.
Based on alkyd resins and UV filters with decorative and protective properties.
Indoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 / 0,375 litres
JUNOLAC Varnish Satin
Wood must be cleant, dry, grease free and sanded. Its dump percentage must not be >15%.
It could be applied over properly maintained old varnishes but in order to get the best results is recommended to remove them completly.
On new woods, it is recommended to prime them with 10-20% diluated Wood Base Coating, properly stretched.
INDOOR
Recommended for all wooden surfaces.
Brush or pneumatic air spray gun.
Pneumatic air spray gun, dilute with a MINERAL Tupertine (D-16) 10-15%.
High resined woods, must be previously cleant with a UNIVERSAL Thinner (D-45) for avoiding drying problems.
Apply in thin coats, properly spread, untill obtaining a uniform shine and a suitable thickness for a perfect wood pores covering