Gloss Finish solvent-based, fully VOC 2010 compliant gloss for interior and exterior use.Based on high quality solid alkyd resins and pigments. For wood and metal surfaces where a tough and durable high gloss finish is required.
Excellent opacity and flow out of brush marks. Withstands repeated washing. Indoor or outdoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 / 0,375 litres
JUNOLAC Gloss Finish Enamel
On wooden surfaces, prime with Synthetic Sealer indoor and Woodbase Coating outdoor. Sand between each coat.
On ferric and steel surfaces, clean and prime with MULTISUPPORT Primer.
On aluminium and galvanised surfaces, clean and prime with MULTISUPPORT Primer.
On cement, Plaster and Plasterboard surfaces, prime with Synthetic Sealer or an acrylic paint with A-100 STIMAX.
INDOOR-OUTDOOR
Recommended for metallic and wooden surfaces (doors, windows, furniture, etc.) Application on thin coats to guaratee inner dryness.
Brush or enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases. Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. Depending on the application conditions, definitive shine might be obtained after 7 days.