Gloss Finish solvent-based, fully VOC 2010 compliant gloss for interior and exterior use.Based on quality solid alkyd resins and pigments. For wood and metal surfaces where a tough and durable high gloss finish is required.
Excellent opacity and flow out of brush marks. Withstands washing. Indoor or outdoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 litres
JUNOPLUS Enamel Gloss
On wooden surfaces, prime with Synthetic Sealer indoor and with Wood Base Coating outdoor. Sand in each coat.
On ferric and steel surfaces, clean and prime with Multisupport Primer.
On aluminium and galvanised surfaces, clean and prime with Multisupport Primer.
INDOOR-OUTDOOR
Recommended for metallic, wooden or masonry surfaces.
Brush and enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases. Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. More aggressives Thinners (D-17, d-45) might cause wrinkling problems and delay the internal drying.